Learn how to hunt elk, moose, turkey, and more with ShotKam Gen 3. Follow this tutorial to wake the ShotKam without bumping your gun.
Hunt Ground Game with Gen 3
1. Select Your Settings
Connect to the ShotKam’s Wi-Fi, open the ShotKam app, then tap the Settings icon. Select the “Ground Game” target type, then select your gun type: shotgun semi-auto, rifle bolt-action, rifle semi-auto, bow, crossbow, etc.
Finally, go into Wake-Up Sensitivity, then select "Sleep Disabled." Save these changes.
2. Once in the Field
When you expect to take a shot, turn your ShotKam in Normal Shooting Mode with one click-and-release of the Control Button; one green LED will illuminate. On a full charge, the camera will stay on:
- Gen 4: about 2 hours.
- Gen 3: about 45 minutes.
It will save any shots (blue LED after the recoil) taken during that time. You will not need to bump the gun before shooting like you do when bird hunting.
3. Take the Shot
Turn the ShotKam ON and be ready to shoot within the battery life of your model (45 minutes for Gen 3, 2 hours for Gen 4). To conserve battery, switch the ShotKam OFF when not in use.
After a shot, a blinking blue LED indicates your shot has been saved. The ShotKam records 15 seconds before and 20 seconds after the shot.
- Videos will be 1 minute and 45 seconds at 1/3 playback speed (maximum video length).
- Multiple shots within 10 seconds are saved as one continuous video.
Note: Keep the back cap firmly twisted on the camera to stop water from entering the USB port.
Examples of hunts from our customers
Moose:
Boar, Fox, and More:
Moose calf:
Whitetail - All throughout this video you'll see ShotKam shots:
Red stag:
Foxes:
Comments
Article is closed for comments.