Find detailed instructions to record and watch ShotKam Gen 3 videos at the range. Easily capture, review, and analyze your shooting footage with ease.
How to record videos
Fully charge your ShotKam.
Step 1: Turn ON with One Click
Begin with your Gen 3 turned off (no LED lights visible). Turn it on with a single click of the control button. You'll see a yellow LED light briefly before it changes to solid green, indicating the camera is ready to record. This is "Normal Shooting Mode."
- Yellow LED light (brief) = Initiating
- Solid green LED light = Ready to take video
Step 2: Sleep Mode
The ShotKam enters "Sleep Mode" after 20 seconds of inactivity (no recoil or action opening/closing) to save battery power. You don't need to turn the camera off between stations.
- Flashing green LED light (slow) = Sleep Mode
Step 3: Wake Up and Shoot Within 20 Seconds
When ready, close the action and shoot within 20 seconds. The action closing wakes the camera from Sleep Mode (solid green LED). Bump the gun or open/close the action to restart the 20-second timer.
- Flashing blue LED light after recoil = Video saved
Watch this quick tutorial video for more information:
Step 4: Watch Your Videos at the Range
To replay your shots, connect to the ShotKam WiFi network on your mobile device and open the ShotKam app. Go to "Watch Videos" to find your shots organized by date and time. Tap on a video to view it and press Play.
- Use the tick bar at the bottom of the screen to scroll frame-by-frame
- Note: The videos are temporary downloads viewable only while connected to the ShotKam app. To save videos to your device’s Photo Library, click here for instructions.
Watch this tutorial to learn how to replay your videos:
Comments
Article is closed for comments.