1. Help Center
  2. Attachment Options
  3. Shotgun

Shotgun Mounting Guide

Learn how to mount your ShotKam on various shotgun types. Explore compatible mounts, assembly instructions, and tips for different gauge sizes.

Will it work on my shotgun?

The ShotKam works on all shotgun types: break-actions (over-and-under), semi-auto, and pump. The default gun setting for the ShotKam is for over/under shotguns, but you can easily change that setting within the mobile app to your gun type.

Shop Gen 4 Mini Barrel Mounts

To browse our Mini barrel mounts, please click on your ShotKam web shop below to be directed to our "accessories" page. 

Shop Gen 4 and Gen 3 Barrel Mounts

To browse our Gen 4 and Gen 3 barrel mounts, please click on your ShotKam web shop below to be directed to our "accessories" page. 

 

12 Gauge Quick-Release Mount

Our 12 Gauge quick-release mount comes with all new ShotKam purchases. The aluminum mount features rubber pads for a firm grip without marking the barrel, ensuring no metal-to-metal contact. Available for Gen 4 Mini, Gen 4, and Gen 3. 

Also fits: 

  • 10 Gauge: Fits the 12 Ga quick-release; no additional mount needed.
  • 16 Gauge: Generally fits the 12 Ga quick-release. If needed, use the extra pad from the "spare parts bag."

To switch the ShotKam between shotguns, loosen the silver screw to open the mount. The camera remains secure, and the top opens like a claw to clamp onto your barrel. Only one 12 Ga quick-release is needed per ShotKam. Tighten with approx. 5 lbs of pressure; do not over-tighten.

Watch how to quickly assemble the 12 Ga Quick-Release Mount:

Sub-Gauge Sizes

Available for Gen 4 Mini, Gen 4, and Gen 3. 

  • 20 Ga Quick-Release Mount: Mount your ShotKam to any 20 Ga over/under or single barrel shotgun.
  • 28 Ga* Mount: Mount your ShotKam to any 28 Ga over/under or single barrel shotgun.
  • .410* Mount: Mount your ShotKam to any .410 over/under or single barrel shotgun.

*These sizes are not available in "quick-release" design. 

Side-by-Side Options (Juxtaposed Double Barrel)

Available for Gen 4 Mini, Gen 4, and Gen 3. 

  • 12 Ga Side-By-Side: Mount your ShotKam to any 12 Ga side-by-side with this additional mount. 
    • *Specification for 12 Ga side-by-side: 40.5 mm to 44mm barrel width.
  • 20 Ga Side-By-Side: Mount your ShotKam to any 20 Ga side-by-side with this additional mount. 

    • *Specifications for 20 Ga SxS: 36 mm to 39mm barrel width. 

  • 28 Ga Side-By-Side: Please email Support@ShotKam.com regarding the 28 Gauge Side-by-Side mount.

The ShotKam can mount to most rifles and some extension tubes as well:

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.