Updating internal clock for date and time

Learn how to update the internal clock on your ShotKam for accurate date and time settings. This guide provides step-by-step instructions to ensure your camera's timestamps are correct.

Fix Date and Time

The Gen 3, Gen 4, and Gen 4 Mini have an internal Real-Time Clock that syncs up with the time in your current location. If you are noticing the date and time stamps on your ShotKam videos are incorrect, please do the following: 

  1. Visit the Google Play Store or Apple App Store on your device, and be sure to install the latest update for the ShotKam mobile app.
    New App Logo
  2. Turn your camera into WiFi Mode, then open the ShotKam app (steps here). 
  3. Record a test video within the app by selecting "Test Recording," then tapping on the red Record icon to start and end the recording. red-circle-icon.png 🎥
  4. Open the dated folder, then confirm that the test video's date and time are now correct. ▶️
Videos from here on out will have the current date. Videos prior to this will not have a corrected date. If your ShotKam Camera continues to revert back to the date 01-01-20 after updating the internal clock, please contact us at support@shotkam.com
 

Note: The 2nd Generation does not have a Real-Time Clock and the date and time stamps are not adjustable (see What ShotKam model do I have?).

 
Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.